LowPro

Our Accordion Roll-up Door system is fabricated using our heavy weight vinyl fabric and durable webbing straps that lift the door panel in pleated folds. Stretched side to side with vertical tracks and industrial rollers, the door stays taut and will sustain a clean, weather-tight finish. Available in extreme widths, these are suitable for aircraft hangers, boat houses and industrial projects where large equipment needs to come in and out with regular use.
In most applications, the addition of an electric motor is required to ensure a consistent lift rate and to make for easier opening. Our standard opener kit comes with a 3 phase, 600 volt electric motor, one remote control, a laser eye safety stop and a internally mounted activation switch.

Our standard doors are sized at 36″ x 80″ and most clients opt for the steel clad, exterior grade door panel. Double doors and oversized doors are also available. Standard hardware includes stainless handle and deadbolt lock.
Door pricing includes adaption to the structure frame to properly integrate the door system, as well as tensioning details to keep the exterior fabric tight and sealed around the door.
Personnel doors are required for safety egress with spacing determined by intended use, internal layout and permit requirements. Allowing one door reachable within 15m travel of any point internally provides a safe allowance for planning purposes.

Lindome’s barn doors are fabricated in-house with aluminum frames, steel siding clad exteriors, and industrial grade track and rollers. They are easy to slide and can provide a simple, cost effective door option for equipment or vehicle access. For extra wide door openings, the slider track can be mounted externally to allow for increased travel distance between door panels.
Given that they have few mechanical parts, they are almost maintenance free and therefore suitable for industrial or remote location projects. Centre windlock pins secure the doors in a closed position and provision is made for a padlock either internally or externally.

For structures that need a more robust door system, utilizing either a roll-up steel door or a steel panel door system are both great options. These provide a feeling more like a traditional building enclosure with weather proof seals and options for insulated solutions. Openers can be manual chain hoist or electric openers.

Lindome ensures that our structures are designed to manage the installation of the appropriate overhead door system but works with our clients to find a local contractor to handle the sale and installation. Since these doors may require annual servicing and are critical to the active use of the building, we like to connect our clients with a local door service provider to ensure that their maintenance is looked after and any response time for repairs is fast and responsive.

Utilizing a 24 gauge, prefinished metal, our steel siding provided a means of increased security for your stored goods or workshop space, combined with a higher level of visual finish. In most cases, the metal can be fastened directly to the standard frame members with flashings provided at corners, around doorways and over lock-block foundations.
Available in a variety of standard colours with flashings and fasteners colour matched. Best suited to permanent installations.

This unique insulated membrane solution is fabricated using a dual layer of our heavy weight vinyl fabric, with closed cell pockets of mineral wool insulation. Available in either 50mm or 100mm thickness, this membrane system achieves an impressive R14 or 28 insulation value respectively. The construction technique holds the insulation in place without thermal break and the finishing of the structure ensures roof to gable seams as well as door/service penetrations are heat welded to prevent air gaps or heat loss.
Combined with insulated doors and basic heating, this insulated membrane will provide an energy efficient structure solution suitable for Canadian winters. In warmer months, the same insulation will keep the structure cooler inside.
Interior and exterior fabric colour can be chosen. We suggest using white interior to increase light bounce and reduce lighting needs. Exterior fabric we suggest a lighter colour – our standard would be grey – to assist in reflection of sunlight and solar heat gain.
Available in partnership with Hallgruppen.